With increasing digitization, a large part of your work depends on computing. However, you can only solve it efficiently with an unstable internet connection. If that’s what you’re dealing with, and you run the network troubleshooter and then encounter a long message, you can’t fix it.
It often states that your computer appears to be configured correctly, but the device or resource (DNS server) is not responding. But what is it? Do you have to upgrade your system or change your ISP provider?
Well, nothing like that! It happens for a number of reasons, mainly involving too much DNS cache, outdated network drivers, or problems with updates or similar. Hence with our guide you can solve the problem by yourself.
How to Fix Unresponsive Device or Resource (DNS Server) in Windows 11/10?
Depending on the various reasons causing the Error, the solutions are different. We’ve mentioned a comprehensive guide to dealing with it but follow it in a logical order!
1. Change Power Management Settings
You may have adjusted power management settings for savings. Also, there is a slight chance that this feature is enabled by default. In either scenario, to save power, your DNS server is not active or responding. Therefore, you must change the power management settings to solve the problem!
Open windows search and open Device Manager. In it, double click Network Adapters and right click your network. Choose Property from the drop-down menu. Inside it, expand the tab Power Management and uncheck the option Allow the computer to turn off these devices to save power .
Now, save Settings, and your problem will be solved. However, if it is not enabled, the methods mentioned below can help.
2. Forget Network and Reconnect in Windows 11/10
Sometimes the network is temporarily bad for unknown reasons, and a simple reconnect can help. However, it will be more effective if you forget the network and re-establish its connection with your Windows PC.
Forget Network and Reconnect in Windows 11
Right-click the network icon on the right side of the Taskbar. Right click the icon and select it Network and Internet Settings. In the Internet Network in Settings, open it WiFi. Click Manage Known Networks and navigate to connection WiFi You; Press the button Forget it next to him. Open WiFi and reconnect to the network.
Forget Network and Reconnect in Windows 10
Open Settings > Network and Internet > WiFi > Manage Known Networks. In it, search for your WiFi network and press the button Forget it next to him. Navigate to WiFi one more time and Add Network.
After that, check if the problem is resolved or not. Also, if you are still experiencing an unstable network accompanied by a DNS server not responding error, the following method should help.
3. Troubleshoot Network Connection
There are frequent problems with your WiFi/broadband or ethernet router. In such a case, you will have to restart the network device to fix the problem. If that doesn’t help, contact your ISP provider for help or use an alternative network to access the internet.
4. Reboot PC
Often Computers Seem to Be Configured Properly, but Devices or servers are not responding due to temporary errors. Therefore, you should restart your PC as that will clear the cache of the device.
5. Update Network Drivers
If you haven’t updated your network driver for a long time then that’s why you are facing DNS server not responding error. Therefore, to work around this, you should update your network driver before uninstalling it.
Press Win+R key to open the Run dialog box. Insert devmgmt. msc to open Device Manager. Inside, double-click Network Adapters, point to your Network driver, right-click, and select Uninstall device from the context menu. Click OK to confirm action. Now, visit your network driver build page and select the latest compatible version to continue. Download and install on your device.
Simple reconnect works like that for the WiFi dongle in solution 2.
Now, restart your device to check if your problem is resolved. But if you recently updated your network driver and started facing problems, the following methods should help.
6. Rollback Network Drivers
When you just update your network driver and start encountering incorrect computer configuration errors, the update is buggy. In such cases, you can restore it to a previous consistent state.
Right click Network Adapters you and choose Properties from the drop-down menu. Expand tabs Drivers and navigate to Roll Back Driver. Click on that, and you’ll be asked to follow the on-screen instructions to continue.
Now that you have successfully restored the previous network driver version, reboot your device for the changes to show.
If you can’t click the Rollback option, you haven’t updated your network drivers recently, which won’t help.
7. Change DNS and IP Address
Often the DNS configuration is incorrect, which can be caused by a wrong DNS or IP address. Hence, to solve this problem, you have to tweak it.
Press the button win and open Control Panel. From above, select Look to Category and choose Network and Internet. Open Network and Sharing Center. Choose Change adapter settings from the left panel. In Internet Connection Settings, double click on Network Adapters that you use. Choose Property and complete the UAC command if it appears. open list; click Internet Protocol Version 4 (TCP/IPv4). Now, open it The properties. Expand tabs General and set both radio buttons to Obtains an IP address automatically AndObtain DNS server address automatically. If it is set, change the radio button to Use the following DNS server addresses. Next input 188.8.131.52 And 184.108.40.206 in Choice And Alternative DNS Servers. Click the checkbox Validate settings on exit to activate it and press OK to save changes.
Now, try again, and most often, this will fix the problem.
8. Clear DNS Cache and Reset IP Settings
Most of the times, connectivity issues occur in DNS Cache and IP Settings. Hence, you have to clear DNS Cache and Reset IP Settings to solve that problem. Most of the time, that fixes the problem.
Open Start Menusearch cmd, and choose Run as Administrator from right Run the following commands one by one: ipconfig/flushdns ipconfig/release ipconfig/release6 ipconfig/renew
Now, wait till you see The operation was successfully completed. The error will be resolved.
9. Disable Proxy, VPN and Antivirus
If none of the above methods help solve the problem, then you are most likely using a proxy or VPN. Thus, disabling it will solve the problem.
You’ll be using a proxy or VPN to mask your web identity, which often results in DNS server not responding issues. Therefore, turn it off to solve the problem.
Also, if you have enabled manual proxy, you must disable it from Settings.
Disable Proxies in Windows 11
Open Arrangement Windows and open it Internet Network. Choose Proxies and turn it off.
Disable Proxies in Windows 10
Press the button Win+I to open Arrangementand navigate to Internet Network. Choose Proxies from the left pane and its setup, then disable it.
After that, restart your PC for the changes to take effect.
Frequently Asked Questions
How to Fix DNS Server Not Responding?
When the DNS Server is not responding, use a command line tool like Command Prompt or Terminal to flush the DNS Cache. This solves the problem.
What does it mean that your computer appears to be configured correctly but devices or resources are not responding?
This means that there is a problem with your DNS server, causing problems with internet connectivity.
How do I reset my DNS server?
To reset the DNS server, you must use the Command Line tool. Open Command Prompt and run the ipconfig/flushdns command until you see a successful prompt.
Wrapping Up Everything
The device or resource (DNS server) not responding issue in Windows 11/10 is quite common. There are several reasons that explain it. This includes turning on power saving mode, poor network connection due to router, temporary glitch, wrong network driver, wrong address, or too much DNS cache.
As such, their solutions vary. Also, using proxies and VPNs is another lesser known reason behind this problem; disabling it will fix the error. We have tested all methods on different devices reporting errors, which have worked effectively. However, clearing the DNS Cache and resetting the IP Settings has worked on most of the devices.
Thus the article about Fix: Your Computer Appears to be Configured Correctly, but Devices or Resources (DNS servers) are not Responding
I hope the information in the article is useful to you. Thank you for taking the time to visit this blog. If there are suggestions and criticisms, please contact us : email@example.com